Components available from STEMandStuff on Etsy
https://www.etsy.com/shop/STEMandStuff
Pod for 4inch speaker
3 5/8” mounting clearance hole
This low profile pod style speaker mount allows you to mount a standard 4” speaker onto a standard 6 inch diameter tube. A clearance hole for the speaker magnet will need to be made. Typically a 3.25” through hole will provide magnet clearance.
PN: T4.40-P4
Baffle for 4” speaker
Mount a 4” speaker into the end of a 4 inch schedule 40 pipe (tube), The baffle has a swell which allows a larger speaker to fit into a 4 inch sch40 tube.
The baffle overlaps the tube end and is mounted with four #4 flat head screws that screw into the edge of the tube. Hardware is included with the kit.
PN: T4.40-B4
Baffle for 5” speaker
Mount a 5” speaker into the end of a 4 inch schedule 40 pipe (tube), The baffle has a generous swell which allows a larger speaker to fit.
The baffle overlaps the tube end and is mounted with four #4 flat head screws that screw into the edge of the tube. Hardware is included with the kit.
PN: T4.40-B5
Mounting Bracket Single DIN head
Mount a single DIN head unit (stereo) into a 4 inch schedule 40 tube. A slot must be machined into the tube.
The mount overlaps the rectangular slot in the tube and is held in place with four (4) #8 sheet metal screws. Hardware is included with the kit.
PN: T4.40-1DIN